I wanted pictures to understand my project fully, so i have made some pictures of what i plan to do, and how i'll go about doing this mod.
The radiator is mounted on the inside to protect it, as they fragile, and then have the fans in pull config mounted on the out of the case's top. I'll mount it by cutting a square hole in the top my case and placing a steel fan grill to mount the radiator and fans to instead.
For optimal performance i have opted to use gaskets for to improve fans pressure and reduce vibrations.
Radiator / gasket / steel mounting grill / gasket / fans / fans grills
![antec-p183-v3-damping-fo_4.jpg (264.73 KiB) Viewed 4102 times Layout of my case + radiator mount + my future fan configuration](./download/file.php?id=3876&t=1&sid=a3f070857a541178493581de9e43e7c1)
- Layout of my case + radiator mount + my future fan configuration
More or less where it will mount, but i don't have all parts yet, so i can't be sure it is the right same for it
![2015-02-06 21.45.52_2.jpg (397.82 KiB) Viewed 4102 times Top mounting for 240mm radiator](./download/file.php?id=3875&t=1&sid=a3f070857a541178493581de9e43e7c1)
- Top mounting for 240mm radiator
Update to follow when i get parts and start work on the mod. Need to get a Dremel cutting for this mod i think, a jigsaw would be a pain on floppy aluminium
![Razz :P](./images/smilies/icon_razz.gif)
__
Also to give my case new life for the next 4-5 years i might paint it black, because the current gray is boring and ugly, where as a black interior of this case looks epic. But it needs to be summer for me to be able to paint it out side and for the paint to cure right.
![antec_performance_one_p183_v3.jpg (729.91 KiB) Viewed 4102 times Gray interior](./download/file.php?id=3877&t=1&sid=a3f070857a541178493581de9e43e7c1)
- Gray interior
![d_104019697.jpg (167.57 KiB) Viewed 4102 times Black interior](./download/file.php?id=3878&t=1&sid=a3f070857a541178493581de9e43e7c1)
- Black interior
But one thing at a time
![Mr. Green :mrgreen:](./images/smilies/icon_mrgreen.gif)